Shaft Fixing Hubs

These shaft fixing hubs are commonly used in general engineering, to provide a mounting point for pulleys, sprockets and couplings.

8 products

Loading filters…

Shaft Fixing Hubs

What is a shaft fixing hub?

A shaft fixing hub is a component with a tapered bore that allows a custom part, such as a fan, impeller, drum, plate sprocket, pulley, or mixer blade, to be mounted onto a shaft using a standard tapered locking bush. The hub is either welded or bolted to the custom part, giving it a tapered bore. A tapered locking bush, with a bore that matches the shaft, is then fitted into the hub and tightened, clamping the part firmly onto the shaft.

This means almost any part can be given a strong, self-centring, easily removable shaft connection, without machining a bore, keyway, or taper directly into the part itself. It also means the same part can be fitted to different shaft sizes simply by changing the bush.

Shaft fixing hubs are made in two main types:

  • Weld-on hubs - steel hubs that are welded directly into or onto a part, such as a steel plate, fan, drum, or fabricated assembly
  • Bolt-on hubs - hubs with a flange and bolt holes that are bolted onto a part, ideal for materials that cannot be welded or where the part needs to be removable

A typical shaft fixing hub has:

  • Tapered bore - matches a standard tapered locking bush size, such as 1210, 1610, or 2012
  • Half-threaded holes - shared with the bush, used to tighten the bush into the hub and to remove it
  • Outer body - a plain steel body for welding, or a flange with bolt holes for bolting
  • Fixing direction - designed for the bush to be tightened either from the hub side or the opposite side, depending on access

Shaft fixing hubs are usually described by:

  • Hub type - weld-on or bolt-on
  • Bush size - the tapered locking bush size the hub accepts, often shown in the reference, such as a hub for a 1610 or 2012 bush
  • Outside diameter - the size of the hub body or flange
  • Width - the length of the hub
  • Bolt pattern - for bolt-on hubs, the number, size, and position of the bolt holes

Key features:

  • Mounts custom parts to shafts - gives fans, drums, impellers, and fabrications a strong shaft connection
  • Self-centring - the tapered bush centres the part accurately on the shaft
  • Easy fitting and removal - parts can be fitted and removed with simple tools
  • Flexible shaft sizes - one hub can suit many shaft sizes by changing the bush
  • No precision machining needed - avoids boring, keying, or tapering the part itself
  • Weld-on or bolt-on - to suit the part material and design
  • Standard bush sizes - uses widely available tapered locking bushes

In simple terms, a shaft fixing hub gives any custom part a tapered bore, so it can be locked onto a shaft with a standard tapered locking bush.

Why are shaft fixing hubs essential?

Shaft fixing hubs are essential because many machines use custom or fabricated parts that need to be fixed securely to a shaft. Machining accurate bores and keyways into large or awkward parts can be difficult and expensive, and welding a part directly to a shaft makes it impossible to remove. Shaft fixing hubs solve these problems by combining a weldable or boltable body with a standard tapered bush connection, giving a strong, accurate, and removable mounting.

Their main benefits are:

  • Strong shaft connection - tapered locking bushes clamp firmly and transmit high torque
  • Accurate alignment - the self-centring taper keeps parts running true, reducing vibration
  • Removable parts - parts can be taken off shafts for maintenance and replacement
  • Simplifies fabrication - no need for precision boring or keyway cutting in the custom part
  • Saves time and cost - quicker and cheaper than machining hubs from solid
  • Flexible shaft sizes - change the bush to suit a different shaft diameter
  • Easy repairs - worn shafts, bushes, or parts can be replaced individually
  • Standard parts - uses widely available bushes for easy replacement

Shaft fixing hubs are used across a wide range of industries and applications, including:

  • Fans and blowers - mounting fan impellers and blades onto motor and drive shafts
  • Mixers and agitators - fixing mixing blades and paddles to shafts
  • Conveyors - mounting drums, rollers, and plate sprockets
  • Pumps - mounting impellers and custom rotors
  • Agricultural machinery - augers, rotors, spreaders, and custom drive parts
  • Plate wheels and fabricated sprockets - creating sprockets and pulleys from steel plate
  • Industrial machinery - custom drives, rotors, and fabricated components
  • Recycling and processing equipment - shredders, rotors, and drums

The main types of shaft fixing hubs

Shaft fixing hubs are usually grouped by how they are fixed to the part and the bush size they accept.

By fixing method:

  • Weld-on hubs - made from weldable steel with a plain outer body. They are welded into a hole in a plate or onto a fabricated part, giving the part a permanent tapered bore. Ideal for steel fabrications, fans, drums, and plate sprockets
  • Bolt-on hubs - have a flange with bolt holes, so they can be bolted to a part. Often made from cast iron or steel, they suit parts that cannot be welded, such as cast parts, aluminium, or plastic, or where the hub needs to be removable

By fixing direction:

  • Hub-side fitting - the bush is fitted and tightened from the same side as the hub
  • Opposite-side fitting - the bush is fitted and tightened from the other side of the part

Choosing the correct direction makes sure there is access to tighten and remove the bush once the part is in its final position.

By bush size:

  • Small hubs - for bushes such as 1008 and 1108, used on light-duty parts and small shafts
  • Medium hubs - for bushes such as 1210, 1610, and 2012, widely used in general engineering
  • Large hubs - for bushes such as 2517, 3020, and above, used on larger shafts and heavier drives

The number in the hub reference often relates to the bush size it accepts. For example, a hub with 16 in its reference usually accepts a 1610 bush, and a hub with 20 usually accepts a 2012 bush.

By material:

  • Steel hubs - weldable and strong, used for weld-on hubs
  • Cast iron hubs - strong and stable, used for bolt-on hubs. Cast iron hubs should not be welded

How to choose the right shaft fixing hub?

Choosing the right shaft fixing hub means matching it to the bush, the part, and how it will be mounted. Work through these points in order:

  • Fixing method - choose a weld-on hub for steel fabrications, and a bolt-on hub for cast parts, non-weldable materials, or removable mountings
  • Bush size - choose a hub that accepts a tapered locking bush suitable for your shaft size and torque
  • Shaft size - check that the required shaft diameter is within the bore range of the chosen bush size
  • Torque and load - choose a bush and hub size suitable for the torque and loads being transmitted
  • Fixing direction - choose the fitting direction that allows the bush to be tightened and removed once the part is installed
  • Outside diameter and width - make sure the hub fits the part and the space available
  • Bolt pattern - for bolt-on hubs, check the number, size, and position of the bolt holes suit the part
  • Material - use steel hubs for welding, and do not weld cast iron hubs
  • Matching bush - choose a tapered locking bush with the correct bore and keyway for the shaft
  • Quality and brand - choose hubs from reputable suppliers for accurate tapers and reliable fixing

How to fit a weld-on hub

Welding a hub correctly helps keep it accurate and true:

  • Remove the bush - never weld the hub with the bush fitted, as heat can damage the bush and taper
  • Prepare the part - cut the hole in the plate or part to suit the hub’s outside diameter, and clean the welding area
  • Align the hub - position the hub squarely in the part, checking it is concentric and at right angles
  • Tack weld - tack the hub in several places around its circumference, checking alignment as you go
  • Weld in stages - weld in short runs on alternate sides to spread the heat and reduce distortion
  • Avoid overheating - do not overheat the hub, especially near the tapered bore
  • Allow to cool - let the hub cool naturally, without quenching
  • Check the fit - check that the bush fits the taper correctly and that the part runs true on the shaft

FAQ - All you need to know about shaft fixing hubs

What is a shaft fixing hub used for?

A shaft fixing hub gives a custom part, such as a fan, drum, impeller, or plate sprocket, a tapered bore, so it can be mounted onto a shaft with a standard tapered locking bush.

What is the difference between a weld-on hub and a bolt-on hub?

A weld-on hub is welded directly into or onto a steel part, giving a permanent mounting. A bolt-on hub has a flange with bolt holes, so it can be bolted to a part, which suits non-weldable materials and removable mountings.

What bush do I need for my hub?

Use the tapered locking bush size that matches the hub, such as a 1610 bush for a hub designed for 1610 bushes. Then choose a bush bore that matches your shaft diameter.

Can I weld a cast iron hub?

No. Cast iron hubs are not suitable for welding, as the heat can crack the casting. Use a steel weld-on hub for welding, or a bolt-on hub for cast iron.

Should I fit the bush before welding the hub?

No. Always remove the bush before welding, and only fit it once the hub has cooled.

How do I stop the hub distorting when welding?

Tack the hub in several places, weld in short runs on alternate sides, avoid overheating, and allow the hub to cool naturally.

What does fixing direction mean?

Fixing direction describes which side of the part the bush is fitted and tightened from. Choosing the right direction makes sure there is access to tighten and remove the bush once the part is installed.

Can one hub fit different shaft sizes?

Yes. The hub suits a particular bush size, and different shaft sizes can be accommodated by choosing a bush of the same size with a different bore.

How do I remove a part fitted with a shaft fixing hub?

Remove the tightening screws from the bush, insert them into the removal holes, and tighten them to push the bush out of the taper. The part can then be removed from the shaft.

Why is my part wobbling on the shaft?

Common causes include a hub that was misaligned during welding, distortion from overheating, uneven tightening of the bush screws, or dirt on the taper. Check the hub alignment and refit the bush, tightening the screws evenly.