Thrust Ball Bearings

These thrust ball bearings are commonly used in steering columns and machine tool spindles, to carry axial loads while permitting rotation.

1200 products

Loading filters…

Thrust Ball Bearings

What is a thrust ball bearing?

A thrust ball bearing is a rolling bearing designed specifically to carry axial loads, which are forces acting along the line of the shaft rather than across it. While a standard radial ball bearing has an inner and outer ring arranged one inside the other, a thrust ball bearing has its rings arranged side by side as flat, ring-shaped washers, with a row of balls rolling between them. This layout allows the bearing to support weight or pressure pushing along the shaft while still letting it rotate smoothly with low friction. 

A typical single-direction thrust ball bearing is made up of three main parts:

  • Shaft washer - has a slightly smaller bore and fits tightly on the shaft, rotating with it
  • Housing washer - has a slightly larger bore and sits in the housing, normally remaining stationary
  • Ball and cage assembly - a ring of steel balls held evenly spaced by a cage, rolling in grooved raceways machined into the faces of the two washers

Key features:

  • Axial loads only - designed to carry thrust loads, with no capacity for radial loads
  • Separable design - the washers and the ball and cage assembly can be mounted separately, which makes installation, inspection, and replacement simple
  • Single or double direction - available to carry axial loads in one direction or in both directions
  • Grooved raceways - the balls run in shaped grooves, which guide them accurately and increase load capacity
  • Moderate speeds - best suited to low- and medium-speed applications
  • High-quality materials - usually made from through-hardened chrome bearing steel, with stainless steel versions available for corrosive environments
  • Wide size range - from small bearings with bores of around 10mm up to large bearings used in heavy machinery

In simple terms, a thrust ball bearing is the component that lets a shaft or part keep turning smoothly while it is being pushed, pressed, or loaded along its axis.

Why are thrust bearings essential?

Thrust ball bearings are essential wherever a rotating component must support a load along its axis. Many machines have parts that carry weight vertically, resist pushing forces, or need to be held precisely in position along the shaft. Standard radial bearings can only handle limited axial forces, and using them beyond that limit leads to overheating, wear, and early failure. A thrust ball bearing solves this by providing a dedicated rolling surface built to take the thrust.

Their main benefits are:

  • Dedicated axial support - they carry pure thrust loads efficiently and reliably, protecting other bearings in the system from overload
  • Precise axial positioning - they keep the shaft accurately located along its length, which is important for gears, spindles, and rotating tables
  • Low friction - rolling contact keeps friction and heat generation much lower than plain thrust washers or bushings
  • Smooth rotation under load - they allow heavy parts to rotate easily, even when supporting significant weight
  • Easy mounting - the separable components make assembly and maintenance simple and quick
  • Simple, cost-effective design - they offer a straightforward and economical solution to many thrust load problems
  • Standardised sizes - common dimensions are shared across major manufacturers, making replacements easy to source

These qualities make thrust ball bearings important in a wide range of applications, including:

  • Automotive - steering systems, kingpins, clutch release mechanisms, and gear selectors
  • Lifting equipment - crane hooks, lifting swivels, hoists, and screw jacks
  • Industrial machinery - vertical shafts, rotary tables, turntables, indexing tables, and low-speed gearboxes
  • Machine tools - tailstocks, lathe centres, and feed mechanisms
  • Pumps and agitators - rotating heads, swivels, and steering components
  • Furniture and consumer products - swivel chairs, bar stools, display stands, and rotating platforms

The main types of thrust ball bearings

Thrust ball bearings are usually grouped by the direction of load they carry and by the shape of their housing washer. There are also related designs and material options for specialised applications.

By load direction:

  • Single direction thrust ball bearings - the most common type, carrying axial loads in one direction only. They are made in several series, such as 511, 512, 513, and 514. For the same bore size, each series is larger and heavier than the one before, giving progressively greater load capacity
  • Double direction thrust ball bearings - carry axial loads in both directions. They have a central shaft washer between two ball and cage assemblies, with a housing washer on each side. This makes them ideal where the thrust changes direction, such as in some gearboxes and screw mechanisms. They are made in series such as 522, 523, and 524

By housing washer design:

  • Flat housing washers - the standard design. These require the shaft shoulder and housing support surface to be accurately square to each other, as they cannot compensate for misalignment
  • Sphered housing washers - have a curved back face that sits in a matching seat washer. This lets the bearing self-align and compensate for small errors between the shaft and housing, which is useful where accurate machining or mounting is difficult. These are made in series such as 532 and 533

By cage design:

  • Flat housing washers - the standard design. These require the shaft shoulder and housing support surface to be accurately square to each other, as they cannot compensate for misalignment
  • Sphered housing washers - have a curved back face that sits in a matching seat washer. This lets the bearing self-align and compensate for small errors between the shaft and housing, which is useful where accurate machining or mounting is difficult. These are made in series such as 532 and 533

Related designs and options include:

  • Angular contact thrust ball bearings - used in machine tool spindles and ball screw supports, where higher speeds, high precision, and combined radial and axial loads are needed
  • Stainless steel thrust ball bearings - for wet, food-processing, marine, or corrosive environments
  • Miniature thrust ball bearings - very small sizes for instruments, small mechanisms, and precision devices
  • Thrust ball bearings with seat washers - supplied with matching seat washers for spherical designs to give a complete self-aligning assembly

How to choose the right thrust ball bearing?

Choosing the right thrust ball bearing means matching it carefully to the loads, speed, mounting arrangement, and operating environment. A bearing that is too small, too light, or poorly matched to the application will wear quickly or fail early. Work through these points in order:

  • Dimensions - match the bore to the shaft diameter, and check the outside diameter and height against the housing and the available space
  • Load direction - choose a single direction for thrust in one direction, or a double-direction bearing where the thrust can act both ways
  • Load size - check the static and dynamic load ratings in the manufacturer’s catalogue. If loads are high, select a heavier series, such as 513 or 514, rather than a lighter one
  • Radial loads - remember that thrust ball bearings cannot support radial loads. Any radial forces must be carried by a separate radial bearing, such as a deep groove ball bearing or needle bearing
  • Speed - thrust ball bearings are best for low and medium speeds. For high speeds, angular contact thrust ball bearings are usually a better choice
  • Minimum load - make sure the bearing always carries enough axial load. If the load is too light, especially at higher speeds, the balls can skid rather than roll, damaging the raceways. Springs are often used to provide a constant light preload
  • Alignment - if the shaft and housing surfaces may not be perfectly square, use a bearing with a spherical housing washer and seat washer
  • Cage material - choose pressed steel for general use, brass for heavy loads, vibration or higher temperatures, and polyamide for lightweight, quiet operation within its temperature range
  • Lubrication - decide between grease and oil. Grease is simple and suits low speeds, while oil is better for higher speeds and helps remove heat
  • Environment - for moisture, chemicals, or washdown conditions, consider stainless steel bearings. Protect the bearing from dirt and contamination with suitable seals in the surrounding design
  • Mounting arrangement - make sure the shaft washer is supported by a shoulder of suitable size, and that the housing washer has a properly machined seat to prevent distortion
  • Standards and brand - stay with the same series and a reputable manufacturer to ensure correct dimensions, quality, and long service life

Essential references and thrust ball bearing ranges

Main series:

  • 511xx series - light series, compact with lower load capacity, for example 51105
  • 512xx series - medium series, the most widely used for general applications, for example 51205
  • 513xx series - heavy series, with higher load capacity, for example 51305
  • 514xx series - extra heavy series, for very high loads, for example 51405
  • 522xx, 523xx and 524xx series - double direction bearings, for example 52205 or 52305
  • 532xx and 533xx series: single-direction bearings with a spherical housing washer, used with seat washers from the U2xx and U3xx series

To show how the series differ, here are typical dimensions for a 25mm bore (bore x outside diameter x height):

51105 = 25x42x11mm

51205 = 25x47x15mm

51305 = 25x52x18mm

51405 = 25x60x24mm

Understanding the bore code:

  • The last two digits of the reference usually indicate the bore size
  • For codes 04 and above, multiply by 5 to get the bore in millimetres, so 05 is 25mm, 10 is 50 mm, and 20 is 100mm
  • The smaller codes are special cases: 00 is 10mm, 01 is 12mm, 02 is 15 mm, and 03 is 17mm

Points to watch:

  • Double direction bearings - the bore of the central shaft washer is usually smaller than the code suggests. For example, a 52205 has a 20mm shaft washer bore, not 25mm, so always check the catalogue
  • Suffixes - these vary between manufacturers and indicate details such as cage material or special features. For example, M often means a machined brass cage
  • Interchangeability - bearings with the same basic reference are generally interchangeable between major brands, but always confirm full dimensions and suffixes before ordering

FAQ - All you need to know about thrust ball bearings

What is the difference between a thrust ball bearing and a radial ball bearing?

A thrust ball bearing is designed to carry loads along the shaft axis, while a radial ball bearing carries loads mainly across the shaft. Their ring layouts are completely different to suit these loads.

What is the difference between single- and double-direction bearings?

A single-direction bearing supports thrust in one direction only, while a double-direction bearing has two ball rows and supports thrust in both directions.

What causes thrust ball bearings to fail?

Common causes include insufficient lubrication, contamination, misalignment, overloading, too little load causing skidding, and incorrect mounting of the washers.

Do they need lubrication?

Yes, they need grease or oil. Grease is common for low speeds and simple maintenance, while oil is better for higher speeds and heat removal.

How do I know when to replace one?

Signs include noise, roughness when turning, excessive axial play, overheating, vibration, or visible wear, pitting, or corrosion on the raceways.