
Needle Roller Thrust Bearings
243 products
Loading filters…
Needle Roller Thrust Bearings
What is a needle roller thrust bearing?
A needle roller thrust bearing is a very thin bearing designed to carry axial loads, which act along the line of the shaft. It uses needle rollers arranged like the spokes of a wheel in a flat cage, running between two flat washers or hardened faces. Because the needles are so thin, the whole bearing can be only a few millimetres thick, while still carrying high axial loads.
A standard needle roller thrust bearing has three main parts:
- An axial needle roller and cage assembly, which holds the needles in position
- A shaft washer, which fits onto the shaft and rotates with it
- A housing washer, which sits against the housing.
The washers are optional.
- If the shaft shoulder and housing face are hardened and ground, the needles can run directly on them, which saves even more space.
- If not, thrust washers are fitted on one or both sides to give the needles a hardened raceway.
The cage both guides the needles and keeps them evenly spaced, which lets the bearing run at higher speeds than loose needles. Needles and washers are usually made from hardened chrome steel (grade 52100), and cages from hardened steel or polyamide.
Why are needle roller thrust bearings essential?
They give the highest axial load capacity for the smallest axial space of any rolling thrust bearing. This makes them ideal where a design has very little room along the shaft, such as in gearboxes, transmissions, and compact machinery. They are stiff, run smoothly, and handle shock loads well.
They are also low in cost and easy to fit, and the cage and washers can be bought separately and combined as needed. Their dimensions are standardised, so a cage or washer of a given reference has the same bore, outer diameter, and thickness, regardless of which reputable manufacturer makes it.
Typical applications include:
- Automotive gearboxes and transmissions
- Differentials and transfer cases
- Steering systems
- Pumps and compressors
- Power tools
- Agricultural and construction machinery
- Rotary tables and indexing heads
- Swivel joints and turntables
- Household appliances
The main types of needle roller thrust bearings
- Axial needle roller and cage assemblies (AXK) - These are the standard design and by far the most common. They are a flat cage with needles and can run directly on hardened faces or between thrust washers.
- Thin thrust washers (AS) - These are thin, hardened washers used as raceways where the shaft shoulder or housing face is not hardened. They need a flat, rigid support behind them, as they are too thin to carry load on their own.
- Thicker thrust washers (LS) - These are thicker, precision-ground washers that can be used as shaft or housing washers where the support behind them is less rigid.
- Complete thrust bearings - A cage supplied with two washers as a ready-to-fit set.
- Combined needle roller bearings - These combine a radial needle roller bearing with a thrust bearing in one unit, so they carry radial and axial loads together.
- Metric and inch bearings - Both are widely available. Metric types are sized in mm, while inch types are sized in fractions of an inch.
Cage variants include:
- Steel cages - Strong and suited to high temperatures, and the standard choice in most sizes.
- Polyamide cages - Light and quiet, but typically limited to around 120°C in continuous use.
How to choose the right needle roller thrust bearing?
- Size and dimensions - The bore must suit the shaft, and the outer diameter must fit the housing recess. Check the total thickness of the cage and washers fits the space available.
- Load - Work out the axial load and whether it is steady or involves shocks. Compare it with the bearing’s basic dynamic load rating and basic static load rating, which are published in manufacturers’ catalogues. Needle roller thrust bearings carry no radial load, so a separate radial bearing is needed.
- Raceways - If the shaft shoulder and housing face are hardened, typically to at least 58 HRC, and ground, the cage can run directly on them. If not, add thrust washers on one or both sides.
- Washer type - Use thin AS washers where there is a flat, rigid support behind them. Use thicker LS washers where the support is less rigid.
- Minimum load - These bearings need a minimum axial load at all times to stop the needles skidding, which damages the raceways.
- Speed and lubrication - Because the outer end of each needle travels further than the inner end, there is some sliding, so these bearings run at lower speeds than ball thrust bearings and need good lubrication.
Essential references and specialised ranges
How the numbering works:
The letters at the start identify the part:
AXK = axial needle roller and cage assembly
AS = thin thrust washer
LS = thicker thrust washer
The numbers show the bore and outer diameter in mm:
The first two digits are the bore, and the last two are the outer diameter, so an AXK 1226 has a 12mm bore and 26mm outer diameter.
Cages and washers of the same size share the same numbers, so an AXK 1226 cage is used with AS 1226 or LS 1226 washers. For bores of 100mm and above, the number is longer, such as AXK 100135.
Always check the bore, outer diameter, and thickness before ordering a replacement.
Suffixes:
TV = glass fibre reinforced polyamide cage
Suffix codes vary between manufacturers, so check the supplier’s catalogue for the exact meaning.
FAQ - All you need to know about needle roller thrust bearings
Do I need washers with a needle roller thrust bearing?
Only if the surfaces the needles run on are not hard enough. If the shaft shoulder and housing face are hardened and ground, the cage can run directly on them. Otherwise, fit thrust washers on one or both sides.
What is the difference between AS and LS washers?
AS washers are thin and need a flat, rigid surface behind them to support the load. LS washers are thicker and precision ground, so they can be used where the support behind them is less rigid.
Can needle roller thrust bearings take radial loads?
No. They are designed for axial loads only. Any radial load must be carried by a separate radial bearing, such as a needle roller bearing or bush.
Do needle roller thrust bearings need lubrication?
Yes, lubrication separates the needles from the raceways, reduces friction, and protects against corrosion. Because the needles slide slightly as they roll, good lubrication is especially important. Most are lubricated by oil from the surrounding gearbox or by grease.
Click here to learn how to maintain a bearing.
Can I replace a needle roller thrust bearing myself?
In many cases, yes. The cage and washers simply slide onto the shaft and sit against the shoulder and housing face. Check the running surfaces for wear or marks before fitting, as the new bearing will only last if the surfaces it runs on are in good condition. Make sure the washers are fitted the right way round, with the raceway side facing the needles.
How do I identify a bearing I need to replace?
The reference is sometimes marked on the cage or washers. If it is not marked, measure the bore, outer diameter, and thickness of the cage and each washer with callipers. Also note whether there are washers on one side, both sides, or neither.
Click here to learn how to measure a bearing.
How can I tell if a bearing is worn or failing?
Warning signs include:
- Grinding, clicking, or rattling noises
- Increased axial play in the shaft
- Missing, loose, or damaged needles
- A cracked, worn, or distorted cage
- Pitting, grooves, or ring-shaped wear tracks on the washers or running faces
- Discoloured needles or washers from overheating